The RC Maker Roll Center Shim Plates for Awesomatix LA are constructed from 2mm carbon fibre, and make changing the lower roll centre on your Awesomatix a breeze! Consisting of 4x 2mm plates, it allows tuning from 2mm + and is very effective along with the use of our 0.5mm and 1mm shim kit (ARCS) which then allows roll centre all the way from 0.5mm to 3.5mm. The plates also have a front and a rear, with cutouts to distinguish them, due to the hole spacing being wider in the front.
They slide in without the removal of your screw, allowing you to slide out the old and in the new in a matter of seconds. Once the plate is installed simply tighten as normal. You can use them for the Very front., very rear and most importantly the inner ones as these are a real pain to change!
The central hole allows easy removal by inserting a 1.5mm driver and sliding them out from the top.
Note: These are suitable ONLY when using LA (+9.0, +8.0) Arms.